• View PDF
    Standard
  •   0091-22-66157017
  •   info@torqbolt.com
    • Home
    2. Grade N10001

    ASTM F468/F468M Grade N10001 335 Ni-Mo Fasteners

    High quality ASTM F468 Ni-Mo fasteners manufactured for industrial and corrosion resistant applications.

    ASTM F468/F468M Grade N10001 Ni-Mo fasteners are manufactured in accordance with ASTM specifications for nonferrous bolts, hex cap screws, socket head cap screws, and studs.

    Chemical Requirements

    UNS Designation Number Alloy General Name Al C, max Cr Cu A Fe, max Mn, max Ni A P, max Si, max Ti Co, max Mo S, max V W Cb
    Grade N10001 335 Ni-Mo . . . 0.05 1.0 max . . . 4.0- 6.0 1.0 balance 0.025 1.00 . . . 2.50 26.0- 30.0 0.030 0.2- 0.4 . . . . . .
    • (A) Elements shown as balance shall be arithmetically computed by deducting the sum of the other named elements from 100.
    • (B) Cobalt is to be counted as nickel.
    • (C) Alloy 625 material shall be refined using the electroslag remelting process (ESR), or the vacuum arc remelting process (VAR).

    ASTM F468/F468M Grade N10001 335 Ni-Mo Tensile Stress Areas and Threads(Inch)

    Nominal Size, in. Coarse Threads-UNC Fine Threads-UNF 8 Thread Series-8UN
    Threads/ in. Stress Area A , in. 2 Threads/ in. Stress Area A , in. 2 Threads/ in. Stress Area A , in. 2
    1 / 4 20 0.0318 28 0.0364 . . . . . .
    5 / 16 18 0.0524 24 0.0580 . . . . . .
    3 / 18 16 0.0775 24 0.0878 . . . . . .
    7 / 16 14 0.1063 20 0.1187 . . . . . .
    1 / 2 13 0.1419 20 0.1599 . . . . . .
    9 / 16 12 0.1820 18 0.2030 . . . . . .
    5 / 8 11 0.2260 18 0.2560 . . . . . .
    3 / 4 10 0.3340 16 0.3730 . . . . . .
    7 / 8 9 0.4620 14 0.5090 . . . . . .
    1 8 0.6060 12 0.6630 . . . . . .
    1 1 / 8 7 0.7630 12 0.8560 8 0.790
    1 1 / 4 7 0.9690 12 1.0730 8 1.000
    1 3 / 8 6 1.1550 12 1.3150 8 1.233
    1 1 / 2 6 1.4050 12 1.5810 8 1.492
    • (A) Tensile stress areas are computed using the following formula:
    • A s = 0.7854 [ D - 0.9743/n ]
    • where:
    • As = tensile stress area, in.2,
    • D = nominal size (basic major diameter), in., and
    • n = number of threads per inch.

    ASTM F468/F468M Grade N10001 335 Ni-Mo Tensile Stress Areas (Metric)

    Nominal Product Diameter and Thread Pitch Stress Area, A mm 2 Nominal Product Diameter and Thread Pitch Stress Area, A mm 2
    M6 × 1 20.1 M16 × 2 157
    M8 × 1.25 36.6 M20 × 2.5 245
    M10 × 1.5 58.0 M24 × 3 353
    M12 × 1.75 84.3 M30 × 3.5 561
    M14 × 2 115 M36 × 4 817
    • (A) Tensile stress areas are computed using the following formula:
    • A s = 0.7854 (D − 0.9382 P) 2
    • where:
    • As = stress area, mm2,
    • D  = nominal thread diameter, mm, and
    • P  = thread pitch, mm.

    Frequently Asked Questions

    What is Hastelloy B-2 (N10001)?

    Hastelloy B-2 is a Ni-Mo alloy (~69 Ni, 28 Mo, low Cr and Fe) optimized for reducing-acid service - particularly hot hydrochloric and sulfuric acids at all concentrations. Per ASTM F468 for bolting in hydrochloric acid plants, acetic anhydride production, and other reducing-chemistry process equipment.

    When do I use Hastelloy B-2 over C-276?

    Use B-2 when service is purely reducing (HCl, H2SO4, organic acids without oxidizing contaminants). Use C-276 when service includes any oxidizing component (chlorides + dissolved O2, mixed oxidizing/reducing acids) - B-2's low Cr makes it vulnerable to oxidizing attack.

    Is Hastelloy B-2 sour-service acceptable?

    Yes. N10001 is listed in NACE MR0175 / ISO 15156 for sour-service bolting subject to standard requirements. Most B-2 demand is chemical-process rather than oil and gas, however.

    What sizes are commonly supplied in B-2 bolting?

    ASME B16.5 flange studs and ASME B18.2.1 hex cap screws are the highest-volume B-2 fasteners. TorqBolt supplies B-2 across the full F468 inch and metric range with PMI + chemistry certification.

    References & Standards

    • ASTM F468 / F468M - Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
    • ASTM F467 / F467M - Companion specification for Nonferrous Nuts (mate with F468 for matched-alloy assemblies)
    • ASTM F436 / F436M - Hardened steel washers (ferrous washer companion when nonferrous washers are not specified)
    • NACE MR0175 / ISO 15156 - Sour-service hardness limits for petroleum and natural gas industries
    • ASME B18.2.1 / B18.2.3 series / B18.3 / B18.6.7M / B18.31 / B16.5 - Dimensional standards referenced by F468
    • DIN 912 / 933 / 931 - Metric hex socket head and hex head cap screw dimensional standards
    Related Specifications
    Surface Treatments
    Certifications
    About Us
    Questions? Contact us.
    Showcase of our Microsites.
    Satisfaction Survey

    survey

    TUVRheinland CERTIFIED

    © TorqBolt P(Ltd) · Built with in INDIA.